How To Turn On Napoleon Gas Fireplace

Download Article

Download Commodity

Gas fireplaces provide all the warmth and atmosphere of a traditional burn down without the ashy cleanup. Powered by a natural gas line or propane gas tank, these household fixtures are simple to apply and take only a few minutes to get upward and running.

1. 1

   Read your fireplace's user manual thoroughly. Before lighting or adjusting your fireplace, read the included user manual thoroughly. Though nearly fireplaces employ similar ignition methods, yours may have a specific element or feature that, when handled improperly, could exist dangerous.^[one]

   • If you do not have a user manual, check online or contact the fireplace'due south manufacturer to get a copy.

2. 2

   Locate and open your fireplace'due south command panel. Most mod gas fireplaces come with a specialized control console that manages the fixture'due south pilot lite. For aesthetic purposes, you'll typically notice this panel subconscious behind the fireplace'south forepart screen, which you lot can open or remove to gain access.^[2]

   • On about gas fireplace models, you can remove the screen by simply tugging information technology off the device.

   Advertisement

3. 3

   Turn the control knob to the off position for at least 5 minutes. Look for a knob on your control panel with the words On, Off, and Pilot on it. If the knob is not in the off position, turn it and so that it is. Then, allow your fireplace sit for at least 5 minutes, allowing any excess or lingering gas to clear out.

   • If you smell a faint corporeality of gas, open your windows and doors to ventilate the expanse.
   • If you lot scent a big amount of gas, leave the house immediately and call your natural gas provider or propane dealer. If y'all can't get a concur of either, call your local fire department.

4. 4

   Twist the shutoff valve until it is parallel with the gas line if necessary. Nearly fireplace manufactures attach a shutoff valve to the device's gas line, giving you greater command over your natural gas or propane output. If your fixture comes with one of these valves, make certain to move it until the handle sits parallel to the gas line, assuasive fuel to enter the fireplace.^[three]

5. five

   Move the control knob to the pilot position. This volition give you access to the device'due south pilot lite, or the small flame that helps the fireplace fire. To avoid any hazardous mistakes, do not twist the knob until you are set up to ignite the pilot light.^[4]

6. six

   Press the control knob down and hit the ignition switch. To ignite the airplane pilot light, press your finger into the center of the control knob and hold information technology in identify. And then, hitting the fireplace'south ignition switch, which is typically a red push located virtually the command knob. Tap the switch until the pilot calorie-free ignites.^[v]

   • If the airplane pilot light fails to ignite after multiple attempts, restart the entire process and try over again. If it continues to neglect, check for any mutual ignition problems or call a professional person for help.

7. vii

   Hold the control knob down for at least thirty seconds. To go on the flame alive, yous'll demand to hold the control knob down for a minimum of 30 seconds, possibly fifty-fifty longer. This will give the thermocouple, a rubber device that stops the gas catamenia if the pilot light shuts off, a take a chance to heat upwardly and register that the pilot is back on.^[6]

8. 8

   Motility the command knob to the "on" position. With the pilot low-cal ignited, turn your fireplace's control knob from the airplane pilot position to the on position. This will make sure the pilot light stays on indefinitely, assuasive you to activate the fireplace whenever y'all wish using the device's wall switch or remote control. When you're finished, remember to supervene upon the fireplace's forepart screen if y'all had to remove information technology.^[7]

   • Be enlightened that, while a power outage should not affect your fireplace's pilot light, it may deactivate whatever switches regulating the gas output.

Advertisement

1. ane

   Look over the user manual included with your fireplace. Every fireplace is different, so bank check your model'due south user manual earlier lighting or adjusting it. While the ignition method will nearly likely be similar, knowing the ins and outs of your specific fireplace volition help you lot avoid any dangerous, and maybe even lethal, accidents.^[8]

   • Contact the fireplace'southward manufacturer if y'all do not accept a copy of the user transmission.

2. two

   Remove your fireplace'south outer cover. For both safety and aesthetic reasons, gas fireplaces come with a front end cover separating the fire bedchamber from the residue of the room. To ignite the pilot low-cal, you'll need to open up or completely remove this cover. These panels are typically made of glass, so lay yours in a safety area to forestall unnecessary damage.^[9]

   • In most cases, you can remove a gas fireplace cover by simply pulling it off the device.

3. 3

   Put a fireplace key into the device'southward gas valve knob. To ignite your device'south pilot light, y'all'll need to insert a fireplace cardinal into the gas valve knob located to the left or right of the fireplace. Once you lot insert the primal, exercise not plow it until after preparing your lighter, otherwise you may release a dangerous corporeality of gas into the room.^[x]

   • Some fireplaces may have this key permanently installed in the wall.
   • If you do non have a cardinal, you can purchase a replacement at most home improvement stores. Brand certain to check your user manual to see what kind of key the fireplace takes.

4. 4

   Concord a long lighter up to the burner and ignite it. Earlier turning the gas valve knob, catch a lighter with a long enough head that you tin can insert it into the fireplace while keeping your hands away from the fire pit completely. Then, place the caput of the lighter next to the device's burner and pull the lighter's fuel trigger. Be prepared to move your hands back chop-chop if the pilot light ignites unexpectedly.^[11]

   • For condom, put on oestrus resistant gloves earlier operating the lighter.
   • If y'all do not have a long plenty lighter to safely ignite the fireplace, insert a lit match side by side to the burner instead.
   • Depending on how far abroad the gas valve knob is, yous may need to accept a friend hold the lighter or operate the key.

5. 5

   Plough the gas key. With the lighter activated, motion the gas valve knob about half a plow counter-clockwise. This volition release gas into the fireplace, causing the pilot light to ignite. Be prepared to move back quickly in case the fire ignites devious gas particles and flares out into the immediate surrounding area.^[12]

   • If yous smell a pocket-sized corporeality of gas, remove the lighter and open your windows and doors to air the room out.
   • If you odour a lot of gas, remove the lighter and go out the house immediately. So, contact your propane dealer or natural gas provider. If neither are available, contact your local burn down department.

6. 6

   Replace the fireplace'southward outer cover immediately. To go on whatever excess gas from escaping into the room, comprehend your fireplace with the front panel you removed earlier. Once the embrace is secure, you lot can safely control the fireplace using the gas valve central, turning it counter-clockwise to increment the flames and clockwise to subtract them.^[thirteen]

Advertisement

1. 1

   Clean your burner plate to remove carbon residue. Over time, the holes inside your burner plate tin get clogged up with carbon residuum, preventing gas from reaching the pilot calorie-free. To fix this, shut off the pilot light and close the gas valve. And then, blow the holes clean using a tin of compressed air.

2. 2

   Replace your thermocouple if the airplane pilot lite won't stay lit. If your pilot low-cal ignites when y'all activate it merely goes out soon after, you may have a defunct thermocouple that needs to exist changed out. To do so, disconnect the thermocouple from the burner and remove information technology with a wrench. Discover a matching device at a hardware store, and then attach information technology to your fireplace past post-obit the included instructions.^[14]

   • To find your thermocouple, await for a pocket-sized rod located adjacent to the pilot low-cal burner.

3. 3

   Modify out the thermopile if the fireplace won't ignite. Thermopiles are small, circular metal probes that, when activated, create electricity and open up your fireplace'southward gas chamber. If your pilot light stays on but your fireplace will not work, you may need to supplant the thermopile. To do so, disconnect the probe from your burner and remove it with a wrench. Then, supervene upon it with a matching thermopile by following the instructions included with the new device.^[15]

   • Await for replacement thermopiles at hardware and dwelling improvement stores.

4. 4

   Rent a professional if you tin't become your fireplace to work. If you can't figure out what's wrong with your fireplace, search online for a gas specialist certified past the National Fireplace Plant. These professionals know all the ins and outs of gas fireplaces and can both figure out the problem and give you an estimate for how much it volition cost to fix.^[xvi]

Advertising

Add New Question

• Question

  My gas fireplace pilot calorie-free is on, just I cannot go the fire to lite. What could be the trouble?

  

  Is it controlled with a wall switch? The thermopile may not be conducting enough voltage to activate the switch. Try cleaning off the thermopile with some fine steel wool or sand paper.

• Question

  How do I plow on the log gear up if the pilot calorie-free is already on?

  

  Just turn the dial to "on" instead of "pilot" and and so flip the switch on the side of your fireplace.

• Question

  Should the chimney vent exist open when the logs are turned on?

  

  Yeah. Burning logs produces carbon dioxide likewise equally carbon monoxide, so the open vent is needed to get these harmful gases out of the house.

See more than answers

Inquire a Question

200 characters left

Include your email address to get a message when this question is answered.

Submit

Advertizing

• When the pilot light is working properly, the flames will await lite bluish.

Thank you for submitting a tip for review!

Ad

• Lighting a gas fireplace involves combining a hot, dangerous material with a highly flammable substance. To go along yourself from getting injured, stay vigilant at all times and adhere to any prophylactic instructions mentioned in your fireplace's user manual.

Advert

About This Article

Commodity Summary X

To calorie-free your gas fireplace, commencement access its control console and turn the shutoff valve then the handle is parallel to the gas line, which will allow gas to enter your fireplace. Then, motility the control knob to the "pilot" position. Next, press and concur the center of the control knob and hitting your fireplace's ignition switch until the airplane pilot light ignites. Concur the control knob downward for at least 30 seconds before yous move it from the "airplane pilot" position to the "on" position, which will keep the pilot on and permit you actuate your fireplace with the switch or by remote whenever you want. To learn how to light your gas fireplace if information technology has a central, read on!

Did this summary aid yous?

Thank you to all authors for creating a page that has been read 598,338 times.

Did this article help you?

Source: https://www.wikihow.com/Light-a-Gas-Fireplace

Share this post